Table of Contents
Advertisement
IMPORTANT
RISK OF ELECTRIC: SHOCK
DO.NOT GPREN
CAUTION:
JO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
READ INSTRUCTIONS . - Ail the safety and opesating
instructions should be read before the appliance
is operated.
RETAIN INSTRUCTIONS - The safety and operating
instructions should be retained for future
reference.
HEED WARNING ~ All warnings on the appliance and
in the operating instructions should be adhered
to.
FOLLOW INSTRUCTIONS - All operating and use in-
structions should be followed.
WATER AND MOISTURE ~ The appliance should not
be used near water - for example, near a bathtub,
washbowi,
kitchen sink, laundry tub, in a wet
base-ment, or near a swimming pool, etc.
LOCATION - The appliance should be installed in a
stable location
WALL OR CEILING MOUNTING
- The appliance
should not be mounted to a wall oF ceiling.
VENTILATION - The appliance should be situated
s0 that its location or
position does not interfere
with its proper ventilation. For exemple, the
appliance should not be situated on a bed, sofa,
rug, of similar surface that may block the
ventilation
openings;
er, placed in a built-in
installation, such as a bookease or cabinet that
may
impede
the
flow
of air through
the
ventilation apenings.
HEAT ~ The appliance should be situated away from
heat sources such as radiators, heat registers,
stoves. or other appliances {including amplifiers)
that produce heat
POWER
SOURCES
~ The applience should be con-
nected to a power supply anty of the type de-
scribed
in the operating
instructions
or as
marked on the appliance.
POWER-CORD PROTECTION ~ Power-supply cards
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them.
Pay particular attention to cords
at plugs, convenience receptactes, and the point
where they exit from the appliance,
POLARIZATION - if your purchased product is pro-
vided with a poiarized power plug, please read
the following
instructions.
This
product
is
equipped with a polarized akternating current ling
plug (a plug having one blade wider than the
other). This plug will fit into the power outlet
only one way. This is a safety feature. If you are
unable to insert the plug fully into the outtet, try
reversing the plug. ifthe
plug shoutd still fail to
fit, contact
your electrician
to replace
your
obsolete outlet. Oo not defeat the safety purpose
of the polarized plug.
CLEANING ~ The appliance should be cleaned only
with 2 polishing cloth or a soft dry cloth.
Never
clean with furniture wax, benzine, insecticides
or other volatile liquids since they may corrode
the cabinet.
POWER LINES - An outdoor antenna should be
located away from power lines.
NONUSE
PERIODS - The power cord of the
appliance should be unplugged from the outlet
when left un-used for a long period of time.
OBJECT AND LIQUID ENTRY ~ Care should be taken
so that objects do not fall and liquids are not
spilled int the enclosure through openings.
DAMAGE
REQUIRING
SERVICE - The apptiance
should
be serviced
by a Pioneer
authorized
service center of qualified service personnel
when:
@
The power-supply
cord or the plug has been
dam-aged,
®
Objects have fallen, or liquid has been spilled
into the appliance.
®@ The appliance has been exposed to rain.
@
The
appliance
does
not
appear
to operate
normatly
or exhibits
a marked
change
in
performance,
®
The
appliance
has
been
dropped
or
the
enclosure damaged,
SERVICING ~ The user should not attempt te service
the appliance
beyond
that
described
in the
operating instructions. All other servicing should
be referred to qualified service personnel.
SS
\
GROUND.
"7
x
CLAMP By :
OUTDOOR ANTENNA GROUNDING - If an outside
antenna is connected to the antenna terminal,
be sure the antenna system is grounded so as
to provide
some
protection
against
voltage
surges
and built-up static charges.
in the U.S.A. section 810 of the National
Electrical Code, ANSI/NFPA
70, provides
information with respect to proper grounding
of the
mast
and
supporting
structure,
grounding
of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna discharge unit, connection
to grounding electrodes, and-requirements for
the grounding electrode. See Fig. A.
CART - An appliance and cart combination should
be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
appliance and cart combination to overtura,
NEC » NATIONAL ELECTRIC CODE
ANTENNA
LEAD IN.
WIRE
ANTENNA
DISCHARGE
UNIT
(NEC SECTION 810 ~ 20)
ELECTRIC
SERVICE
GROUNDING CONDUCTORS
ol
ee
(NEC SECTION 810 ~ 21)
ace
GROUND CLAMPS
POWER SERVICE GROUNDING
aa
ELECTRODE SYSTEM
z
(NEC ART 250, PART H)
Information to User
Advertisement
Table of Contents
