Table of Contents
Advertisement
RX-504VBK/RX-504VLBK
RX-505VTN/RX-505VLTN
Listening to AM or FM Broadcasts
®@ Selecting a Station
1.Press the AM or FM key.
*M
AM
2. Use the TUNING keys to find a station.
<< TUNING >
Each time the TUNING keys are pressed, the frequency is varied
in steps of 10 kHz for AM and 0.1 MHz for FM. The setting will
vary continuously while the keys are pressed and held.
FM
Oh TC
owe
ti
fl
Auto-tuning starts when the TUNING keys are released and stops
when a Station is tuned. To halt auto-tuning, press a TUNING key.
3. The TUNED indicator will lignt when a station is tuned in correctly.
vue
Adjust the antenna if the indicator does not iight
@ While tuning in an FM station, press the FM MODE/MUTE
key
to light the MUTE/AUTO indicator, this cuts out inter station noise
while tuning
@ The STEREO indicator will light when an FM stereo station !s tuned
in correctly.
If the FM stereo station is weak and noisy, press the FM MODE/MUTE
key again to turnotf the MUTE/AUTO indicator to improve reception
(broadcast
becomes
monaural).
A
A en
De el ect
Fh
as a 9 ea | orem |
@ Presetting Stations
You can preset a total of 40 AM and FM station (CH 1 through CH 40).
1. Tune in the desired station with the TUNING keys.
MUT!
rs
2. Press the MEMORY
key to light its indicator.
MUTE
MEMORY
STEREO
Mure
MEMORY
Cl
FM
.
~
"ch
3. Enter the channel number with numeric keys while the indicator
is on (for about 5 seconds).
MUT!
TUNED]
[STEREO]
MUTE
MP
deg
Ich
@ |f{ the indicator turns off before you enter the channel number,
press the MEMORY
key again.
4. Repeat this procedure
to preset other channels.
(No.20220) 1
Advertisement
Table of Contents
