Biostar H61MHP Setup Manual page 16

Motherboard Manual
SATA1~SATA4: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 4 channels SATA2 interface,
it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.
JPANEL1: Front Panel Header
This connector includes Power-on, Reset, HDD LED and Power LED
connections. It allows user to connect the PC case's front panel switch
functions.
Pin Assignment
1 N/A
3 HDD LED(+)
5 HDD LED(-)
7 Ground
9 Reset Control
JSPKR1: Chassis Speaker Header
Please connect the chassis speaker to this header.
14
Function Pin Assignment
N/A 2 Power LED (+)
4 Power LED (+)
HDD LED
6 Power LED (-)
8 Power Button
Reset Button
10 Ground
Pin Assignment
1 Ground
2 TX+
3 TX-
4 Ground
5 RX-
6 RX+
7 Ground
Function
Power LED
Power-On Button
Pin Assignment
1 +5V
2 N/A
3 N/A
4 Speaker