Operating Parameters; Intended Use; Contraindications And Clinical Limitations; Installation And Operating Instructions - Bewatec P2312 Instructions For Use Manual

III. OPERATING PARAMETERS
Model
P2312
IV. INTENDED USE
The product is intended for the prevention and relief of bedsores in bedridden patients.
V. CONTRAINDICATIONS AND CLINICAL LIMITATIONS
The product should be used with caution in patients with spinal fractures.
VI. INSTALLATION AND OPERATING INSTRUCTIONS
Installation:
1.
Hang the control box on the footboard of the bed or place it on the floor near the footboard.
1.
Lay the air mattress flat on the bed with proper orientation of the head and foot ends. If the
2.
mattress is equipped with a pressure sensor pad, insert the sensor connector into the socket of the
main control box.
Device Connection:
2.
Plug the air supply connector into the control box (see Figure 2).
1.
Plug the control box into a power outlet.
2.
Operation Steps:
3.
Table 1. Operating parameters
Maximum
Inflation
inflation
time (min)
pressure
20 kPa 4
Operating cycle for
alternating mode
(min)
10-40, step size: 1
Figure 2
3
Operating cycle for
continuous lateral
rotation (min)
10-120, step size: 1
Turning
angle
0°-30°±5°