Table of Contents
Advertisement
Using iriver plus 3
Initializing Disk
Upgrading Firmware
1. Connect the product to the USB port of your PC and
1. Connect the product to the USB port of a PC with
run iriver plus 3.
Internet access and run iriver plus 3.
2. Select Tools > Portable Device > Initialize Disk and
2. Select Tools > Portable Device > Firmware Upgrade
click Start when the initialization confirmation
and complete the upgrade process by following the
message appears.
on-screen instructions.
3. A completion message will appear once the
initialization process is completed and your product
will be disconnected from your PC.
= Do not disconnect the product from your PC while downloading the firmware
upgrade file.
= Once download is complete, disconnect the product to activate the firmware upgrade.
a |f the existing firmware is the latest version, a message to confirm the installed
version is the latest will appear. A message wil automatically appear on screen
=a Itis recommended that you use the format feature within the product for formatting
when connecting the product to your PC and the latest firmware version is available.
® You need to backup all necessary files before initialization, since formatted files
cannot be recovered.
42 Other Information
Advertisement
Table of Contents
