Table of Contents
Advertisement
Chapter5: Factory mode parameter setting instructions and notes
5-1 Enter into the factory mode
Switch on TV set, and make it works normally:
1.Press 【MENU】 key on the remote control
2.Press number keys "1"、 "1"、 "4"、 "7" on remote control to enter password. Finish entering
the factory mode. If you want to quit the factory mode, Please. press【EIXT】key
Factory menu displays as bellow：
5-1-1ADC ADJUST (ONLY FOR YPBPR AND VGA)
1. AUTO ADC ：AUTO ADJUST FOR Ypbpr CHANNEL
2．Restore Factory Def：RESET THE CHANGES
5-1-2．GENERAL SETING (Usually used)
W/B ADJUST(Usually used)
16
Advertisement
Table of Contents
