Roland EM-305 Owner's Manual page 38

Intelligent synthesizer
Hide thumbs Also See for EM-305:
Table of Contents

Advertisement

Give MIDI a Try
With MIDI, you can use the keyboard of the EM-305/303 to play an external MIDI
device, or make recordings on a MIDI sequencer.
This section describes a few
examples of simple MIDI operations.
Playing an External MIDI Device
You can play an external MIDI device (such as a synthesizer) using the keyboard of
the EM-305/303.
Use a MIDI cable to connect the MIDI OUT connector on the EM-305/
303 to the MIDI IN connector on the other MIDI device.
Set the receive channe! on the other MIDI device to channel 4.
* Refer to the manual for the MIDI device for an explanation of how to set the receive
channel.
MIDI OUT
i
rm
S i p e
aR RTEE
S E
|EbeREDE
ie AAA
When you set the receive channel on the external MIDI device to channel 4, you
}
MIDI IN
S
.
00 Ca]
==
=
5,
can play the MIDI device using the upper keyboard section of the EM-305/303. You
can also change the tone of the MIDI device by switching the tone on the EM-305/
303.
* When you use the connections and settings just described, the tone of the upper
section and the MIDI device are both played.
Make Recordings with a MIDI Sequencer
You can make recordings of your EM-305/303 performances on a MIDI sequencer.
ia 7|
Use a MIDI cable to connect the MIDI OUT connector on the EM-305/
303 to the MIDI IN connector on the MIDI sequencer.
pny 2|
Make a realtime recording on the MIDI sequencer.
f MIDI OUT
MIDI IN
* You can store the performance you recorded with the MIDI sequencer on a floppy
disk for playback at any time.
* When playing back your performance on the MIDI sequencer, use a MIDI cable to
connect the MIDI OUT
connector on the sequencer to the MIDI IN connector on
the EM-305/303.
* You can make recording with the MIDI sequencer while synchronizing the music
style of the EM-305/303.
Check out the manual for the MIDI sequencer for more
information.
* In preparation for playback of recorded data, setup your sequencer so that only
Channel Messages are transmitted. (Refer to your sequencer manual.)
(If your sequencer transmits start/stop and /or MIDI clock messages to your EM-
305/303, problems with playback will occur.)
36

Advertisement

Table of Contents
loading

This manual is also suitable for:

Em-303

Table of Contents