Alcatel onetouch Pixi 3 Quick Start Manual page 20

* RADIO WAVES
Proof of compliance with international standards (ICNIRP) or with
European Directive 1999/5/EC (R&TTE) is required of all mobile phone
models before they can be put on the market. The protection of the
health 'and safety for the user and any other person is an essential
requirement of these standards or this directive.
THIS DEVICE MEETS INTERNATIONAL. GUIDELINES FOR
EXPOSURE TO RADIO WAVES
Your device is a radio transmitter and receiver. It is designed
not to exceed the limits for exposure to radio waves
(radio frequency electromagnetic fields). recommended by |
international guidelines. The guidelines were developed by
an independent scientific organisation (ICNIRP) and include
a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
The radio wave exposure guidelines use a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit
for mobile devices is 2 W/kg. ,
Tests for SAR are conducted using standard operating
positions with the device transmitting at its highest certified
power level in all tested frequency bands. The highest SAR
values under the ICNIRP guidelines for this device model are:
Maximum SAR for this model and conditions under which
it was recorded:
Head SAR LTE Band 3+Wi-Fi 1.485 W/kg
Body-worn LTE Band 3+Wi-Fi 1.734 Wikg
During use, the actual SAR values for this device are usually
well below the values stated above. This is because, for
purposes of system efficiency and to minimize interference
on the network, the operating power of your device is
automatically decreased when full power is not needed. The
lower the power output of the device, the lower its SAR value.
Body-worn SAR testing has been carried out at a separation
distance of 5 mm. To meet RF exposure guidelines during
body-worn operation, the device should be positioned at least
this distance away from the body.
18