Specifications; Performance Data; Drive Units - Infinity COMPOSITIONS P-FR Owner's Manual

PERFORMANCE DATA
Drive UNITS
AMPLIFIER
(BUILT-IN POWER AMPLIFIER FOR
LOW-FREQUENCY SECTION)
DIMENSIONS
(also see Figure 14 on the next page)
SPECIFICATIONS
Frequency Range:
Sensitivity:
Impedance:
Maximum Peak Output:
Amplifier Requirements:
Low Frequency:
Lower Mid:
Upper Mid:
High Frequency:
Crossover Frequencies:
Peak Output:
Power Supply:
Power Consumption:
Width:
Height:
Depth:
Weight:
25 ~ 20,000 Hz (—6 dB @ 25 Hz)
35 ~ 20,000 Hz (+2 dB)
96 dB @ 2.83 V and 1 m (anechoic conditions)
6Q
118 dB (spl on program)
Recommended for use with amplifiers
10 ~ 150W (@ 8 Q)
1 x 12" (300 mm) high-efficiency, long-
throw, linear motor, magnetically shielded
4x5 1%" (125 mm) high-efficiency, long-
throw, magnetically shielded
2x 4" (100 mm) high-efficiency,
polypropylene diaphragm,
magnetically shielded
1x 1" (25 mm) soft dome, high-efficiency,
neodymium magnet, magnetically
shielded, elliptical wave guide
110, 350, 3,000 Hz
350 VA
120 V~ 60 Hz
300 W (maximum), 8 W (standby)
7 5" or 194 mm (not including feet)
54 3" or 1,390 mm (minimum -— glides in )
19 5" or 500 mm (maximum depth)
78 lb or 34.5 kg (each)
Infinity Compositions P-FR Owner's Manual ¢ 13