Advertisement
4. Install the camera
1. On the windshield select the installation position where the mount
is attached.
2. Clean the windshield using water or alcohol, wipe it with a dry
cloth.
3. The electrostatic stickers with two-sided protective film. Peel off
the bottom side protective film from the electrostatic sticker. Attach
the electrostatic sticker in the selected position on the windshield.
4. Attach the mount to the front camera's mount connector, then
push it in until the mount be installed.
5. Peel off the upper side protective film from the electrostatic
sticker. Remove the protection film of the 3M tape on the mount,
then fix the mount and camera on the electrostatic sticker.
5
Advertisement
