AB Quality 2706-P4 Series Installation Instructions Manual page 13

12 InView Marquee Message Display
First
sign
Mounting Instructions
2706-P72 and 2706-P74
series NEMA 4 and 4x
models
Publication 2706-IN006E-EN-P
Second
sign
Mounting
brackets
4. Use chains (not supplied) to hang the signs from the ceiling.
TIP
1. Attach the two sign brackets to a wall, ceiling, or other surface.
Be sure to place the brackets so the bracket flanges face
appropriately as shown below. Mount the brackets the following
distance apart (measured from the center of the mounting holes
in each bracket):
Mounted so flanges are hidden behind the sign
2706-P72CNx: 41.25 in (104.8 cm)
2706-P74CNx: 65.25 in (165.8 cm)
Sign brackets, facing
in behind the sign
TIP
2. Mount the sign on the sign brackets using the two large hex
bolts supplied.
First
sign
First
mounting
bracket
Use chains capable of supporting 4 times the total
weight of the signs.
Mounted so flanges show on the sides of the sign
2706-P72CNx: 43.5 in (110.5 cm)
Wall
or
2706-P74CNx: 67.5 in (171.4 cm)
ceiling
Do NOT install the sign directly to drywall or
plasterboard. The sign must be fastened to a surface
capable of supporting at least four times the weight
of the sign.
Second
sign
Second
mounting
bracket
Sign brackets, facing
out from the sign