Elite Gourmet EWM-6122 - 5QT. STAINLESS STEEL BUFFET SERVER WITH WARMING TRAY Manual

Also See for EWM-6122:

Instruction manual (19 pages)

Table of Contents

Contents

1 PARTS IDENTIFICATION
2 ASSEMBLY
3 BEFORE FIRST USE
4 HOW TO USE
5 HINTS & TIPS
6 CLEANING & MAINTENANCE
7 IMPORTANT SAFEGUARDS
- 7.1 READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE
8 SHORT CORD PURPOSE
9 POLARIZED PLUG
10 Documents / Resources
- 10.1 References
- 10.2 Download manual

Elite Gourmet EWM-6122 - 5QT. STAINLESS STEEL BUFFET SERVER WITH WARMING TRAY Manual

PARTS IDENTIFICATION

Clear Dome Lids with Slots – convenient see-through lids that includes slots to accommodate serving utensils.
Cool-Touch Knobs – safely and easily handle lids to serve food.
Buffet Server Trays – includes two 2.5qt. capacity server trays, great for serving all types of foods.
Heating/Warming Surface – flat stainless steel warming surface. Also great to use for keeping hors d'oeuvres or other dishes warm.
Thermostat Control – choose from three different heat settings to keep all types of food warm to preference.
Retaining Shelf – holds the two buffet server trays to ensure stability.
Main Body – main heating unit.
Cool-Touch Serving Handle – safely and easily carry or transport the buffet server to serving table.

ASSEMBLY

LID ASSEMBLY: Assemble lids with the knobs. Make sure to not tighten the screw too tight or it will cause the plastic to crack
ASSEMBLY - Step 1

Please note, when removing your buffet server from its box, the warming plate is packaged upside down for compact packaging purposes.
When placed correctly, the logo should be facing right side up. Please refer to the diagram above for the correct way to assemble.
Once the warming plate has been properly situated, the retaining shelf and buffet server trays can be placed onto the warming plate.

NOTE:
When placing the buffet server on any surface, make sure a trivet, hot pad, or a high heat resistant material is placed beneath the buffet server to prevent heat damage to your tables or countertops.

BEFORE FIRST USE

Remove all packaging materials including plastic, cardboard, Styrofoam and literature. Make sure that all parts are in good condition.
Clean and thoroughly dry all parts to remove any packaging residue before using for the first time. (See "CLEANING AND MAINTENANCE" section for instructions.)

Do not immerse the warming tray or power cord in water or any other liquid!

HOW TO USE

Place the retaining shelf onto the warming tray and place your serving trays into the retaining shelf. Place the Buffet Server on top of a flat, stable, heat-resistant surface.
Place your pre-cooked food items into each buffet server tray.
Plug the power cord into a standard 120V electrical outlet. The indicator light will come on.
Turn the knob to adjust the thermostat control to your desired heat setting. When the setting is on the highest setting, the warming tray will reach a temperature of approximately 175-180°F. Once the selected setting has been reached, the indicator light will shut off.

NOTE: THIS DOES NOT MEAN THE APPLIANCE IS OFF. THE SURFACE OF THE WARMING TRAY WILL STILL BE VERY HOT. USE CAUTION.
NOTE:
- The initial 15 minutes of use may result in minimal smell and smoke. This is due to the burning of the protective substance applied to the heating elements during manufacturing. This is normal and harmless and will disappear with subsequent use of the product.
- Do not use this appliance for cooking or defrosting food.
When finished using the Buffet Server, unplug the power cord from the electrical outlet and allow the unit to cool completely.
Remove any remaining food from the buffet server trays.
Once the Buffet Server and its parts ar e completely cooled, wipe down, wash and thoroughly dry before storing or using the unit again.

NOTE:
The indicator light will continuously turn on and off while the buffet server is in operation as it maintains the temperature selected.

USING THE WARMING TRAY FOR SERVING:

Do not leave food in buffet server for more than 5 hours.
It is not recommended to leave a buffet serving tray empty while buffet warmer is on.
Do not use this appliance for cooking or defrosting food.
Use caution when serving food from the warming tray as the surface will be very hot.

Make sure the unit is unplugged.
Remove the retaining shelf, serving trays, and the lids. Place the warming tray on top of a flat, stable, heat-resistant surface.
Ensure that the flat stainless steel surface of the warming tray is clean and thoroughly dry.
Place pre-cooked food items onto the warming tray.
Plug the unit into a standard 120V outlet. The indicator light will turn on.
Turn the knob to adjust the thermostat control to your desired heat setting. Once the selected setting has been reached, the indicator light will shut off.
NOTE: THIS DOES NOT MEAN THE APPLIANCE IS OFF. THE SURFACE OF THE WARMING TRAY WILL STILL BE VERY HOT.
When using the warming tray, food items can only be kept warm for a shorter amount of time because they are being left uncovered. Maximum time will be 4-5 hours or else food will begin to dry out, discolor or taste may start to change.
Once you are done using the warming tray, remove the power cord from the electrical outlet.
Remove any remaining food from the warming tray.
Once the warming tray has cooled down completely, clean and thoroughly dry before storing or using the unit again. (See "CLEANING AND MAINTENANCE" section for instructions.)

NOTE:
DO NOT use the clear lids directly on the hot surface of the warming tray.

HINTS & TIPS

It is important to maintain all cooked foods at a minimum of 140°F over an extended period of time to prevent any food borne illnesses.
Use a food thermometer to monitor the temperature of the food and adjust the temperature control if necessary to maintain a minimum of 140ºF.
Temperatures may fluctuate as the food is being served and as the contents of the large pan and/or buffet trays are emptied.
You may adjust the temperature accordingly to avoid over or under heating the prepared food.
All foods have different consistencies and may require a lower or higher setting to keep the food warm. For example, a higher temperature setting will be required to keep mashed potatoes warm and a lower temperature to keep gravy warm.

CLEANING & MAINTENANCE

Wash the clear dome lids, retaining shelf, and buffet server trays with warm soapy water and a soft cloth or sponge. DO NOT wash in dishwasher.
ONLY the buffet server trays are dishwasher safe.
Clean the warming tray with a damp, soapy cloth or sponge.
DRY ALL PARTS THOROUGHLY BEFORE STORING OR OPERATING THE BUFFET SERVER.

NOTE:

Never immerse the warming tray or the electrical cord in water or any other liquid!
Do not use any abrasive soaps, detergents, or cleaning materials to clean this appliance.
Always make sure the appliance is off, unplugged from the electrical outlet, and completely cool before cleaning.

IMPORTANT SAFEGUARDS

The Elite Brand takes consumer safety very seriously. Products are designed and manufactured with our valued consumers' safety in mind. Additionally, we ask that you exercise a level of caution when using any electrical appliance by following all instructions and important safeguards.

READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE

When using electrical appliances, basic safety precautions should always be followed as below:

Do not touch hot surfaces. Use handles and knobs.
Do not overfill the Buffet Server Trays.
To protect against electrical shock, do not immerse the appliance or power cord in water or any other liquid.
Close supervision is necessary when any appliance is used by or near children.
Do not operate the appliance without food contents. The warming tray and serving trays may warp and change shape from the heat.
Unplug from outlet when not in use and before cleaning. Allow unit to cool completely before putting on or taking off parts, and before cleaning.
Do not operate this or any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair or adjustment.
The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury.
Do not use outdoors. For household use only.
Do not let cord or plug hang over edge of table or counter, or touch hot surfaces.
Do not attempt to move or transport this appliance while it is in operation and plugged into the electrical outlet.
Do not use the appliance for other than its intended use.
Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, first turn all control knobs to the "OFF" position, then remove plug from wall outlet.
Do not place this appliance on or near a stove, electric or gas burner, or in a heated oven.
Do not clean with metal scouring pads. Pieces can break off the pad and touch electrical parts, creating a risk of an electrical shock.
A fire may occur if the appliance is covered by or touching flammable material including curtains, draperies, walls and the like when in operation.
Do not place any of the following materials in the unit: Paper, cardboard, plastic and/or similar non-food materials.
Some countertop and table surfaces, such as Corian®, wood, stone and/ or laminates, are not designed to withstand prolonged heat generated by certain appliances. It is strongly recommended by countertop manufacturers and Maxi-Matic that a hot pad or trivet be placed under your Elite buffet server to prevent possible damage to the countertop surface.

SHORT CORD PURPOSE

Note: A short power cord is provided to reduce the risk of personal injury resulting from becoming entangled in or tripping over a long cord.

Longer power-supply cords or extension cords are available and may be used if care is exercised in their use.

If an extension cord is used:

the marked electrical rating of the extension cord should be at least as great as the electrical rating of the product;
the extension cord should be arranged so that it will not drape over the counter top or tabletop where it can unintentionally be pulled on or tripped over by children or pets.

POLARIZED PLUG

If this appliance is equipped with a polarized plug (one blade is wider than the other), please follow the below instructions:

To reduce the risk of electrical shock, this plug is intended to fit into a polarized outlet only one way. If you are unable to fit the plug into the electrical outlet, try reversing the plug.

If the plug still does not fit, contact a qualified electrician. Never use the plug with an extension cord unless the plug can be fully inserted into the extension cord. Do not alter the plug of the product or any extension cord being used with this product. Do not attempt to defeat the safety purpose of the polarized plug.

Visit: www.maxi-matic.com for support on this product.