Lan - Toshiba Satellite A210-10W User Manual

A210
Connecting
To connect the internal modem cable, follow the steps below.
■
In case of a lightning storm, unplug the modem cable from the
telephone jack.
■
Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack.
Do not pull on the cable or move the computer while the cable is
connected.
If you find that the modem speed is low or communication is interrupted
when you are using the modem, please set the CPU speed to Maximum
within the Power Options.
Disconnecting
To disconnect the internal modem cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the
connector.
2. Disconnect the cable from the computer in the same manner.

LAN

The computer is equipped with networking hardware that supports
Ethernet LAN (10 Mbps, 10 BASE-T) and Fast Ethernet LAN (100 Mbps,
100 BASE - TX).
Do not install or remove an optional memory module while the Wake-up on
LAN feature is enabled.
The Wake-up on LAN feature does not work on battery power.
In Hibernate/Power off mode you should always leave the computer
connected to the AC adapter if you are using this feature.
4-8
Connecting the internal modem
User's Manual