Toshiba Password Utility - Toshiba Satellite A210-10W User Manual

TOSHIBA Password Utility

The TOSHIBA Supervisor Password Utility provides two levels of password
security: User and Supervisor.
Passwords set in TOSHIBA Supervisor Password Utility are different from
the Windows
User Password
To start the utility, point to or click the following items:
Launch TOSHIBA Assist -> SECURE -> User Password
■
Registered
Click to register a password of up to 8 characters. After a password is
set, you will be prompted to enter it when you start the computer.
■
Not Registered
Click to delete a registered password. Before you can delete a
password, you must first enter the current password correctly.
■
Owner String (text box)
You can use this box to associate text with the password. After you
enter text, click Apply or OK, then, each time the computer is switched
on, this text will be displayed along with the prompt for the password.
Supervisor password
If you set a supervisor password, some functions will be restricted when a
user logs on with the user password. To set a supervisor password:
TOSHIBA Assist -> SECURE -> Supervisor password
This utility lets you do the following:
■
Register or delete the supervisor password.
■
Specify restrictions for general users.
Starting the computer by password
If you have registered a password, enter it when prompted.
The password is necessary only if the computer was shut down in boot
mode, not in Hibernation or Sleep mode.
To enter a password manually, follow these steps:
1. Turn on the power as described in Chapter 3,
The following message will appear in the LCD:
Enter Password [xxxxxxxx]
At this point, the hotkeys Fn + F1 to F9 do not work. They will function after
you enter the password.
2. Enter the Password.
User's Manual
® login password.
Getting Started.
A210
6-13