Marking The Bearing Caps - ARB Airlocker RD259 Installation Manual

2 Removing the Existing Differential

Marking the Bearing Caps

2.4
 Using a small pointed center punch, gently mark the bearing caps
in a way that will enable you to know which cap is 'LEFT' and which
cap is 'RIGHT', which way is 'UP' and which way is 'DOWN'.
(Fig.1.)
HINT : Many installers choose to make one punch mark on
the left hand side of the left hand bearing cap and a
similar mark on the housing at close proximity to the
cap mark. The right hand side is then designated with
two punch marks on the right hand side of the cap and
two similar punch marks on the housing.
6
Figure 1.