3-5-2 Removing and Installing a Memory Module
Before installing a memory module, make sure to turn off the computer and unplug the power cord
from the power outlet to prevent damage to the memory module. Be sure to install DDR5 DIMMs on
to this motherboard.
Follow these instructions to install a DIMM module:
1.
Insert the DIMM memory module vertically into the DIMM slot and push it down.
2.
Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3.
Reverse the installation steps when you want to remove the DIMM module.
3-5-3 Memory Module Population Table
Note:
•
When only one DIMM is used, it must be populated in memory slot A1.
2
Memory Type
Voltage (V)
Connector
Speed (MT/s)
Channels
DIMM Per Channel
DIMM Capacity (GB)
System Hardware Installation
1
DDR5
5V
UDIMM ECC/Non-ECC
5200
3600
1,2
1,2
2,4,8,16,32
- 29 -
2