Siemens N5 D4 Series Information For Use page 11

You can change the standard setting of the preset
power levels. You can find out how to do this in the
"Basic settings" section → Page 13.
9 Time-setting options
Your hob has various functions for setting the cooking
time:
¡ Switch-off timer
¡ Timer
¡ Runtime
9.1 Switch-off timer
You can use this function to programme a cooking
time for one or more cooking zones. The cooking zone
is automatically switched off once the time that is set
has elapsed.
Switching on Switch-off timer
Select the cooking zone and the power level.
1.
Touch ​ ⁠ .
2.
​ ⁠ on the cooking zone lights up.
a
Within the next 10 seconds, set the required cook-
3.
ing time in the settings area.
Touch ​ ⁠ : 30 minutes
‒
Touch ​ ⁠ : 10 minutes
‒
4. Touch ​ ⁠ to confirm the selected setting.
a The cooking time begins to elapse.
a A signal tone sounds once the cooking time has
elapsed.
Touch any symbol.
5.
a The displays go out and the signal tone stops.
Changing or switching off Switch-off timer
Select the cooking zone and touch
1.
To delete the time, change the cooking time in the
2.
settings range or set to
​ ⁠ .
​ ⁠ .
8.2 Activating PowerMove
Requirement: Only place one item of cookware on a
FlexZone.
Select one of the two cooking zones in the
1.
FlexZone.
Touch ​ ⁠ .
2.
a The display next to ​ ⁠ and the power level in the area
in which the cookware is located light up.
a The function is switched on.
Note: You can change the power levels of the zones
during cooking.
8.3 Deactivating PowerMove
Touch ​ ⁠ .
▶
a The display next to ​ ⁠ goes out.
a The function is switched off.
9.2 Timer
Enables the activation of a timer of 0–99 minutes. This
function can be used independently of the cooking
zones and other settings. It does not automatically
switch off the cooking zones.
Switching on Timer
Touch ​ ⁠ .
1.
​ ⁠ lights up on the display.
a
Set the required time in the settings area.
2.
Touch ​ ⁠ : 10 minutes
‒
Touch ​ ⁠ : 05 minutes
‒
Touch ​ ⁠ to confirm the selected setting.
3.
a The time starts to elapse.
a A signal tone sounds once the cooking time has
elapsed.
Touch ​ ⁠ .
4.
a The displays go out and the signal tone stops.
Changing or switching off the Timer
Touch ​ ⁠ .
1.
In the settings area, change the time or set to
2.
delete the time.
Touch ​ ⁠ to confirm the selected setting.
3.
9.3 Runtime
The stopwatch function displays the time that has
elapsed since activation.
Switching on Runtime
Touch ​ ⁠ .
▶
​ ⁠ lights up on the display.
a
a The time starts to elapse.
Switching off Runtime
Touch ​ ⁠ .
▶
Time-setting options en
​ ⁠ to
11