Summary of Contents for HARDKORR HYPERION Series
- Page 1 S E R I E S SINGLE ROW LED LIGHT BARS 10 inch to 50 inch INSTRUCTION MANUAL HKLB-HPR-10S / HKLB-HPR-20S / HKLB-HPR-30S / HKLB-HPR-40S / HKLB-HPR-50S V2.0 - 1 1.2023...
- Page 2 Our aim is for you to be completely satisfied with your purchase, and therefore your new Hardkorr product is backed by a comprehensive warranty and an outstanding after-sales customer service team.
-
Page 3: Table Of Contents
FREQUENTLY ASKED QUESTIONS WARRANTY DISCLAIMER While caution has been taken to ensure the accuracy of the contents of this guide, Hardkorr assumes no responsibility for errors or omissions. Please note that specifications and product functionality may change without notice. For assistance with assembly or installation, parts and service, please visit www.hardkorr.com or... -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS IMPORTANT: RETAIN FOR FUTURE REFERENCE & READ CAREFULLY Failure to follow these instructions may result in personal or property injury, may reduce the lifespan of your product, and may void your warranty. • Ensure you comply with your state or territory’s laws and regulations around the installation and use of auxiliary lighting. -
Page 5: Specifications
SPECIFICATIONS PRODUCT SPECIFICATIONS SPECIFICATION 10” 20” 30” 40” 50” HOUSING MATERIAL Powder coated 6063 Aluminium alloy LENS MATERIAL UV-coated polycarbonate REFLECTOR MATERIAL Vacuum-metallised polycarbonate LED TYPE OSRAM OSLON® SSL 150 POWER 105W 165W 210W 270W 3780 8820 13860 17640 22680 RAW LUMENS 6020 / 8939 /... -
Page 6: Dimensions & Mounting
DIMENSIONS & MOUNTING HKLB-HPR-10S (10 inch) 248.0mm 267.7mm 300.0mm HKLB-HPR-20S (20 inch) 524.0mm 543.7mm 576.0mm HKLB-HPR-30S (30 inch) 800.0mm 81 9.7mm 852.0mm HKLB-HPR-40S (40 inch) 1007.0mm 1026.7mm 1059.0mm HKLB-HPR-50S (50 inch) 1283.0mm 1302.7mm 1335.0mm... - Page 7 UNDER-MOUNT (SLIDING) LEGS DUAL MOUNTING OPTIONS Your Hyperion Series light bar comes with both end-mount and under-mount (sliding) legs in the box. You can use whichever legs suit your application best. END-MOUNT LEGS • Fasten the end-mount legs to the bar using the included spring washers and 8mm x 14mm hex bolts, but do not tighten all the way (you may need to adjust the angle later).
-
Page 8: Installation
INSTALLATION PRIOR TO INSTALLING THE LIGHT BAR ON YOUR VEHICLE, HARDKORR RECOMMENDS TESTING THE LIGHT BAR AND WIRING HARNESS OUTSIDE OF THE VEHICLE. Disconnect the negative cable of the battery. Choose whether to use the end-mount legs or under-mount legs. Attach whichever legs you are using to the bar - see page 5 for further instructions. -
Page 9: Wiring Diagram
WIRING DIAGRAM CABIN-MOUNTED SWITCH 12/24V RELAY FACTORY HIGH-BEAM CABLE BATTERY CONNECTION (WITH FUSE TOWARD BATTERY END OF POSITIVE CABLE) BATTERY BATTERY PIGGYBACK ADAPTER HIGH-BEAM WHITE CABLE END = WHITE DRL YELLOW CABLE END = ORANGE DRL TO FUSE BOX USE THE APPROPRIATE BLADE FUSE ADAPTER SIZE FOR YOUR VEHICLE... -
Page 10: Operation
• Turn on the switch that is connected to your light bar wiring harness. HIGH AND LOW BEAM MODES Your Hyperion Series light bar incorporates high and low beam modes. The light bar has a memory function so it will remember which mode you have selected even if the vehicle is switched off. -
Page 11: Contents & Accessories
CONTENTS & ACCESSORIES PACK CONTENTS ITEM Light bar (with black coloured inserts pre-installed) End-mount legs Under-mount legs HK Blue coloured inserts Medium Grey coloured inserts Wiring harness (with 12V relay + switch) HB3 /H4 Piggyback adapter Mini-blade fuse adapter Blade fuse adapter Spare 40A fuse Spare 24V relay ACCESSORIES AVAILABLE... - Page 12 CONTENTS & ACCESSORIES PIGGYBACK ADAPTORS For vehicles that require a piggyback adaptor other than the HB3 and H4 we include, we sell the following adaptors separately: HKWIRPB-COL Piggyback Adaptor for Holden RG Colorado & Trailblazer HKWIRPB-AMR Piggyback Adaptor for Volkswagen Amarok HKWIRPB-DMX Piggyback Adaptor for Isuzu RT D-Max &...
-
Page 13: Frequently Asked Questions
Rinse thoroughly with a garden hose or pressure washer. If using a pressure washer, ensure you do not bring the nozzle too close to the light. Toll Free: Monday - Friday Language spoken: English 1800 533 544 9AM - 4PM (AEST) support@hardkorr.com... - Page 14 (e.g. completing and returning your warranty card if applicable). TO BEGIN A WARRANTY CLAIM: If you believe your Hardkorr product is defective, it must be returned to Hardkorr for inspection by our warranty claims department.
- Page 15 DISCONTINUED ITEMS Discontinued items that are still under warranty will be reviewed by Hardkorr. If a discontinued item is covered under warranty it may be replaced by an equivalent or superior item. If an equivalent item is not...