Radio Shack HTX-212 Owner's Manual page 29

USING THE STANDARD MEMORY CHANNELS
The HTX-212 has 30 standard memory channels where you can
store frequently-used frequencies, along with duplex and subaudi-
ble tone settings, for quick access.
Storing a Frequency
1. Press VFO and tune to a frequency you want to store. Set all
duplex and subaudible tone settings, (see "Using Subaudible
Tones" on Page 33), and the transmit power setting.
2. Press Е. Then rotate TUNE, or press UP or DOWN on the micro-
phone, until the HTX-212 displays the desired memory num-
ber to the left of the frequency.
3. Press MR. The HTX-212 beeps twice and stores all settings
into the selected memory channel.
Changing Stored Settings
To change the receive frequency, follow the steps under "Storing a
Frequency." Follow these steps to change the transmit frequency
or a tone squelch option without changing the receive frequency.
l. Press MR.
2. Rotate TUNE, or press UP or DOWN on the microphone, to
select the memory channel you want to change.
3. Ifyou want to turn tone squelch on or off, repeatedly press T-
SQL to select the desired tone squelch mode. (See "Using
Subaudible Tones" on Page 33)
4. Press Е, then press MR. The HTX-212 displays tF and the
transmit frequency, and M-CH flashes.
5. Rotate TUNE, press UP or DOWN on the microphone, or enter
the desired transmit frequency using the microphone's key-
pad.
6. Press A. The HTX-212 displays tC and the current transmit
subaudible tone.
7. Rotate TUNE, or press UP or DOWN on the microphone, to
change the transmit subaudible tone.
8. Press A. The HTX-212 displays rC and the current receive
subaudible tone.
9. Rotate TUNE, or press UP or DOWN on the microphone, to
change the receive subaudible tone.
IO. Press MR. The HTX-212 saves the new settings.
29