Operation Outline; Basic Operation Reference - JVC RX-308BK Manual

RX=308BK
RX-309TN
Operation Outline
Basic Operation Reference
Turn on the power Push the POWER switch to turn on the receiver, The display lights:
NOTE: Pushing the POWER switch again turns off the power and lights the STANDBY
light. : :
Select speakers Use the.SPEAKERS. switch-to choose between the two sets of speakers. To use your
(page 16)
headphones, insert the headphone. plug into the PHONES jack on the receiver.
[3] Choose an audio source — To choose an audio source, press one of the SOURCE selector buttons on the receiver or select
(page 12) a o ee
w
[4] Operate the audio Refer to the manual provided with each component. If your JVC components are connected
source (pages 18-20) to the COMPU LINK jack of the receiver, you can operate them using the remote control.
(5) Adjust volume and tone Rotate the MASTER VOLUME control on the receiver or press the VOLUME button on the
(pages 16-17} remote control to adjust volume. See page: 16 for other ways to change the volume or tone.
Page 1}
(No.20375): 1-13