Table of Contents
Advertisement
Chapter
2 Ili
Poem Orelslige) mela
(Connect to the CDP-3100) |
Disc data display section
iy Player operation setting
section
Ey Disc data input section
Player display section
Headphone output section
L} Player operation control section
Control unit
@ Disc data display section
This section consists of three time code indicators,
three counter display indicators, and a ten-digit
counter.
TIME CODE indicators
When an optional interface board (DABK-3102 or
DABK-3103) is installed, these indicators show
the output mode during output of time code from
the player, and during the conversion to and output
of time code from time data on the disc.
ND: Non-drop frame mode (SMPTE, 30 Hz).
D: Drop frame mode (SMPTE, 29.97 Hz).
EBU: EBU signal (25 Hz).
2-6
Chapter 2 Function of Parts and Controls
Counter display indicators
Press the TIMER MODE key to change the
counter display.
ACTUAL TIME: Displays the current track
number and the elapsed playing time of the
current track in frame units.
REMAINING TIME: Displays the remaining
playing time of the current track in seconds.
SET TIME: Displays the cue point in STANDBY
or JOG mode.
Counter
TRACK NO.: Indicates the current track number.
While lead-in or lead-out signal data are being
read, only "00" (lead-in) or "AA" (lead-out)
appear.
INDEX: Indicates the current index number when
an indexed disc is loaded. Flashes during an
index search.
Advertisement
Table of Contents
