Jecod AF Series User Manual

AF Series Auto Fish Feeder
USER'S MANUAL
Warning:
1. To ensure personal safety, children or people without the
ability to identify danger are prohibited from using the device.
2 Do not disassemble the device to avoid damage.
3. Do not let children play with this product.
4. The battery should be pulled out, if the device will be idle
for long time.
Please subject to the actual products due to technology upgrade
I. Introduction
AF series feeder is under IC smart control, which can
manually set feeding time and quantity. Suitable for fish
tanks of different sizes. It can meet the daily needs of
aquarium enthusiasts for feeding fish. In order to use this
product correctly, please read and
instructions carefully before installation and use.
II. Control Panel
Switch Button Set Button Manual/Save Button
Battery icon
The number of days
between feedings
Timing icon
Feed icon byte1 byte2 byte3 byte4
Portion size
icon
Time Button Program Portion
Button
Button
Product Features
1. Built-in 3 AA batteries (rechargeable), no external power
supply (AA batteries need to be purchased by the user).
2. Daily feeding time can be set.
3. Feeder can be set to synchronize with the local time.
4. Auto fish feeding on time, up to 6 feeding times per day,
set the daily feeding time for each meal.
5. Food quantity of per feeding can be set freely (No.1-No.9),
maximum up to 9 times
6. Small size and multi-function.
7. LCD display to display time and feeding parameters.
8. The capacity of the installed extension hopper can
reach 250ml or even 500ml.
9. Easy to fill the food.
10. This product is suitable for granulates up to 3 mm.
III. Installation & Accessories
.
Outlet
understand the
Installation Instructions:
1.
1) Installation:
① Install the bracket, and install the adjustment knob to the
edge of the aquarium. The maximum glass thickness is
15mm.
② Install the base on the platform through the suction cup.
2. Replacement Instructions:
1) Accessories include: base, feeding ring, sucker, 3 AA
batteries.
2) The extended hopper can be dismantled. If there is no need
to the extended hopper, the upper cover can also be
disassembled and installed on the hopper.
3) To replace the battery, you need to disassemble the battery
compartment (only the AA battery can be replaced).
4) To add feed, open the top cover o the hopper and pour in
the feed.
Cover
Extended
Feed silo Battery compartment
Feed silo
Screw
Knob
360°
IV. Factory Settings
Number of meals
1
2
-
Explain: "-" is unset;
Running time is 2 seconds per serving.
V. Functional Configuration
1. Memory function: No need to reset parameters after each
power failure.
2. Operation keys: Set parameters according to II. Control
Panel.
3. The Feed icon is displayed when manual feeding or auto
feeding is on.
4. Power display: Displays the current battery.
VI. Control Process
Movable
Battery icon
Base
Timing icon
Feed icon
Main interface (Standby state)
1. Feeding starts when it comes to the preset feeding
time.
2. The main screen shows the next feeding time, current
battery, and the charging status (as shown in the picture
above).
VII. Operation Settings
1. Time Setting
Switch Button Set Button Manual/Save Button
Battery icon
Timing icon
Feed icon
Time Button Program
Volume
Feeding time
(Servings/meal)
8:00 2
20:00 2
- -
The number of days
between feedings
byte1 byte2 byte3 byte4
Portion size
icon
The number of days
between feedings
byte1 byte2 byte3 byte4
Portion size
icon
Button
Time diagram