Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Jecod Manuals
  4. Aquariums
  5. AK-70
  6. User manual

Jecod AK-70 User Manual

Led aquarium lights
Hide thumbs

Advertisement

Quick Links

Download this manual
LED
Aquarium Lights
Model：AK-70
User's Manual

Advertisement

loading

Related Manuals for Jecod AK-70

Summary of Contents for Jecod AK-70

  • Page 1 Aquarium Lights Model：AK-70 User's Manual...

  • Page 2: Specification

    AK-70 Aquarium Light can imitate the natural light under the sea. It can create a natural and comfortable living environment for your marine creatures such as fish and corals etc. AK-70 consists of six groups of LEDs including White, Blue 1, Blue 2, Violet, Green and Red.
  • Page 3 Lamp layout w hite blue1 blue2 voilet green LED Spectrogram...

  • Page 4: Installation Diagram

    Installation Diagram Upper Join Curve Rod Join Lever Lower Join Lamp body Holder Fix Screw Installation Steps 1. Connect the Curve Rod and Holder. Tighten by revolve clockwise the screw thread at both ends. 2. Screw Join 2 to the nut on the lamp body.
  • Page 5 4. Place Join 1 to the end of Curve Rod. Screw the nut to the Curve Rod to secure Join 1. 5. Connect the Join1 and Join 2 with Join Lever. You could bend the Curve Rod to your desired angle. AK-70 Structure Drawing...
  • Page 6 APP User Guide Scan the below barcode to install the application to your phone or tablet. Alternately, IOS user can search “Jebao” in App Store, and Android user can use the link below to download the application. http://iot.ekewe.net/tools/jebao-lamp.apk Open the APP, click “Regedit” to crew a new account. Or sign ○...
  • Page 7 Fill in the information and click "Register complete” Add Device: two methods available...
  • Page 8 IOS user can use Method Ⅰ only. Method Ⅰ: Return to your phone’s home page and click on WLAN (Android) or Wi-Fi (IOS) under “Setting”. Find the AK-70 Wi-Fi, which starts with JEBAOLL in the network lists, and click it to connect.
  • Page 9 Note: When connecting with the Method 1, AK-70 shall be subjected to Wi-Fi resetting. Method Ⅱ: click "+" in the interface that pops up. (Only for Android) Click refresh button in the interface ( skip to Step 6 if the...
  • Page 10 The configuration starts automatically. The name of the lamp shall occur in the "Devices" when the Android system is configured; Click < in the IOS system to return "Devices" to see the lamp name. Click on the device name to operate the corresponding lamp while...
  • Page 11 the indicator light on the lamp body is green and the device displays ONLINE in the interface. Note: If the indicator light on the lamp is green but your mobile device is offline, you need to connect your mobile device to Wi-Fi in order to operate the lamp.
  • Page 12 Note: If the devices cannot be added through the above 2 steps, reset the Wi-Fi of lamp by pressing the button on the lamp body for several seconds until the indicator light turns red. Then repeat □ Steps and □ 10.
  • Page 13 M: One progress bar is corresponding to one LED group. There are 5 preset modes of different LED color combination. The minimum brightness under each mode is 33%. M1 - M5 interface M1: White is dominated. M2: White is dominated, and Blue is weaker with slight Red, Green and Purple supplemented.
  • Page 14 Program You can set the program for 24 hours. The APP can save up to 8 programs. Each program can control 8 lamps maximum. ○ Click Program Click to the setting interface. Android: Drag the bolder point (operating point) on the blue straight line to set the brightness of Blue for 24 hours.

  • Page 15: Operating Point

    Line on which the operating point is located Overlapping of six lines Operating point Before setting During setting A: Set the blue line by dragging the operating point; B: Click the middle line C: Transfer the operating point to the purple line...
  • Page 16 D: Set the purple line. Repeat the above steps. iii. After setting Click "Save" and "Run" orderly upon completion of setting to start the program. IOS System Program Setting Illustration...
  • Page 17 Operating point Six overlapping lines Before setting During setting Each line has the operating point. Drag the operating point of each line to perform setting.
  • Page 18 iii. After setting Click "Save" and "Run" upon completion of setting to start the program. 12. Group ○ Click Group and click to enter into the group interface. Select the devices required and click OK  to group multiple lamps into one group. The group can controls up to 8 lamps. The group follows the same setting of the main lamp.
  • Page 19 Cancel One Click – Selected  Double Click – Cancel During Group Slate lamp Main lamp After Group Cancel Group Under the Group page, click either main lamp or slate lamp to go...
  • Page 20 to the Select Device page. Unselect the lamp you want to remove from the group. Click OK  to save. 13. Setting Edit Names: You can edit the name of your lamp devices to facilitate user management. Input the name and click Save. 14.
  • Page 21 IOS: Go to Devices Page, slide the device name to the left and click Unbind to delete the device.
  • Page 22 ON/OFF MODE On/Off button / Mode/Wi-Fi Wi-Fi Reset Reduce brightness Increase brightness AK-70 has two modes, Single Color Mode and Mixed Color Mode. Six working functions under Single Color LED Mode： White，○ Blue 1, ○ Blue 2, ○ Violet, ○...
  • Page 23 supplement Red、Green and Violet，○ Blue mainly with weaker White and supplement Red、Green and Violet，○ Blue mainly. MODE : Single press MODE can change LED working functions under the same mode (Single Color Mode or Mixed Color mode). For example, it will change circularly from White to Blue 1 to … to Red to White to …...
  • Page 24 slight change or press and hold until it reaches your desired brightness. ON/OFF ：ON/OFF button by single press. Wi-Fi Reset by long press.