Fixed Installation - Realistic HTX-100 Owner's Manual

FIXED INSTALLATION
When you are installing your transceiver at a fixed location,
positioning is not critical. Place it where it is easy to operate,
and where it is not in any danger of being dropped.
Connecting a Fixed Antenna
1
Select an outdoor antenna that is designed for the
1 0-meter band or that can be tuned to the 1 0-meter
band.
2
Install the antenna according to its instructions.
3
Route the antenna cable to the location of your trans-
ceiver.
4
Screw the antenna cable's connector onto the ANT
connector on the back of your transceiver.
WARNING WARNING WARNING
When you are installing or removing a fixed station
antenna, use extreme caution. If the antenna starts to fall,
let it go! It could contact overhead power lines.
If the
antenna Is In contact with the power line, touching It
could kill you! Call the power company and have them
remove the antenna. Do not attempt to remove the antenna
yourself.
~
19