Advertisement
QUICK
REFERENCE
If the remote control fails to operate
TV functions,
replace the batteries
in the remote control unit,
1
Open the battery cover,
2
Insert two "AAA"
size
batteries
3
Close the battery
cover,
(supplied
with the product),
%
,, Place the batteries
with their terminals
corresponding
to the (k)
and
(
)
indications
in the battery
compartmer/t,
Improper
use of batteries can result in chemical
leakage or explosion.
Be sure to follow the instructions
below.
o Do not mix batteries of different types. Different types of batteries have different characteristics.
o Do not mix old and new batteries.
Mixing old and new batteries can shorten tile life of new batteries or cause
chemical
leakage
in old batteries.
o Remove batteries as soon as they are worn out. Chemicals
that leak from batteries can cause a rash. If you
find any chemical
leakage, wipe thoroughly
with a cloth.
o The batteries supplied
with this product may have a shorter life expectancy
due to storage conditions.
o If you will not be using tile remote control unit for an extended
period of time, remove batteries from it.
IMPORTANT:
The POWER indicator on the AQUOS television
should light GREEN indicating
you have power to the
AQUOS television,
If the POWER indicator
on
the AQUOS television
still
does not light up, press TV
POWER on the REMOTE
CONTROL to turn the power
on,
o
o
c_u_
Dw_ Fu
o
o
| I
raEc
IMPORTANT:
IF THE UNIT DOES NOT POWER ON- UNPLUG THE
AQUOS TELEVISION FROM THE OUTLET AND
REPEATTHE INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE
CONTACT US AT 1-800-BE-SHARP,
Please refer to the BASIC ADJUSTMENT
SETTINGS
SECTION for EZ setup and basic channel setup
functions
and USING EXTERNAL EQUIPMENT
SECTION for other device connections
(DVD, VCR,
AUDIO, etc) in your AQUOS operation
manual
Q-7
Advertisement
