JVC GR-DVL100U Manual page 31

60x
INDEX Indications (cor
LCD Monitor /Viewfinder Indications During Playback
Indications
@ Displays the sound mode. (7 bg. 32, 33) 'Appears if a tape is not loaded when the Recording Start/Stop Button or
© Displays the tape speed. (CF pg. 13) TAPE! SNAPSHOT Button is pressed while the Power Switch is set to "EV" or
@ Appears while a tape is running. "@".
: Playback
Fast-Forward/Shuttle search TAPE END Appears when the tape ends during recording or playback. (C7 pg. 15)
Rewind/Shutlle search
: Pause
Forward slow-motion DIFFERENT Appears if a tape in another format is loaded.
+ Reverse slow-motion FORMATTED TAPE
: Audio Dubbing
j© : Audio Dubbing Pause Appears when the date/time i not st. (pg. 11)
© Displays the date/time. (> pg. 32, 33) SET DATE/TIME! Appears when the built-in clock battery runs out and the
@ Dias hetive cade, irene previously set datetime i erased. Consult your nearest |VC desler
® «BRIGHT : Displays the brightness of the LCD
monitor. ( pg. 14) 'Appears for 5 seconds after power is turned on if the lens cap is attached.
'= SOUND : Displays the speaker volume. TENS CAF' a
(> pg. 31)
@ The level indicator moves. aU DUB ERROR '© Appears if Audio Dubbing is attempted on a blank portion of a tape.
A, DUB ERROR! 'Appear f Aud Dubbing is attempted on a tape recorded inthe LP
<
; ON AN EA RECORDED shapers if Audio Dubbing is attempted on a tape recorded in 16-bit
<CANNOT DUB
eappears if. DUB () on the remote control is pressed when the erase
Warning Indications pou A ter rection tab eset to "SAVE
—
-
<CHECK TAPE'S ERASE
Indications Function PROTECTION SWITCH>
Displays the battery remaining power. INSERT ERROR ! © Appears if Insert Editing is attempted on a blank portion of a tape.
Remaining power level: high—————<@a] +x] an
ir] Remaining power level: exhausted
WERT ERROR! 'Appears if Insert Editing is attempted on a tape recorded in the LP mode.
As the battery power comes close to nil, the battery indicator < blinks. ON OT EO ED | °APPEArs if INSERT (C) on the remote control is pressed when the erase
'When the battery power is exhausted, power turns off automatically. TAPE>, Protection tab is set to "SAVE".
<CHECK TAPE'S ERASE
rm 'Appears when no tape is loaded. (> pg. 12) PROTECTION SWITCH>
. Appears when the erase protection tab is set to "SAVE" while the Power 'Appears if dubbing of copyguarded signals is attempted while this
CHECKTAPE'S ERASE | Svitchicset to "EY" or fa" > pp. 12) COPYING FAILED camcorder is being used as a recorder.
ee 'The error indications (E01 — E06) show what type of malfunction has
Appears if dit i s detected on the heads. Use an optional cleaning cassette. rr 'occured, When an error indication appears, the camcorder turns off
o oe on Ree e ee er oa 68 HAT INSATEGUARD | automatically. Remove the power s u p p l y (battery, etc.) and wait a few
HEAD CLEANING REATTACH BATTERY minutes for the indication to clear. it d o e s , you can resume using the
REQUIRED USE camcorder. If the indication remains, consult your nearest JVC dealer.
CLEANING CASSETTE
ry Appears if condensation occurs. When this indication is displayed, wait
more than 1 hour until condensation disappears.
CONDENSAT
OPERATION PAUSED.
PLEASE WAIT