Power Saving; Hcec Setup - LG UN64 Series Installation Manual

Hide thumbs Also See for UN64 Series:
Table of Contents

Advertisement

40

Power Saving

Static Saving
• It is the item for setting the level to reduce the backlight control from the items for saving the consuming power, which is increased or decreased by 10
steps from 0 to 100. 100 makes the consuming power set to the same one from the TV. 0 reduces the consuming power to the minimum. The default
value is 100.
- The value displayed at the OSD is not changed and only the actual setting value is converted to percentage based on the static saving
value to set.
- 0 ~ 30: HIGH, 40 ~ 60 : MID, 70 ~ 90 : LOW, 100 : OFF.
Minimum Backlight
• This function controls the minimum backlight in case of using the Ambient Light sensor.
Keyless Off Hours
• Automatically TV will be turned off if there is no key input for the preset time period.

HCEC Setup

(Depending on model)
CEC Mode
(Depending on model)
• You will have 2 modes to choose [Default], [HCEC] and [TVLink-CEC].
• If [Default] is selected, you can use SIMPLINK which is provided in LG TV. Also you can enable and disable SIMPLINK through SIMPLINK MENU.
• If [HCEC] is selected, you can use TVLink-HCEC Protocol. (For more detailed information, please refer to TVLink-HCEC Protocol document)
• If [TVLink-CEC] is selected, TV will not directly work for key input except for power key. And volume related keys will work just in case of Follower
volume control mode. (For more detailed information regarding the scenario of volume control, please refer to "TVLink-CEC protocol" document)
IR Decoding
• When 'IR Decoding' is set to 'Enable' , the TV decodes and changes it into a CEC Message and sends it to Command via the HDMI CEC Line. The default
value is Disable.
Device ID
• Sets the ID of a device(Logical Address) connected to the CEC Line. You can choose 'All' and from '0 x 01' to '0 x 0E'(All, 0 x 01 ~ 0 x 0e).
• The default value is 'All' .
StandBy
• Set the sending and receiving scenario of OpStandBy(0 x 0c) command.
• Ths detailed scenario is described on the table below.
Send Only
Receive Only
All
Off
Send
Receive
O
X
X
O
O
O
X
X

Advertisement

Table of Contents
loading

Table of Contents