Disc Title Input - Pioneer KEH-P5000 Owner's Manual

Erasing the ITS Program
You can erase one or all selections of the
program for the disc being played by ITS.
To erase a single selection:
1.Start ITS play. (See page 20.)
2.Play the track you wish to erase by using
disc number search or track number
search.
3.Hold down button ® in bank [11] for
more than 2 seconds. ("CLEAR" appears
on the display [30] for about 3 seconds.)
To erase the disc program:
1.Start normal play.
2.Play the disc you wish to erase by using
disc number search.
3.Hold down button ® in bank [11] for
more than 2 seconds to erase the pro-
gram. ("CLEAR" appears on the display
[30] for about 3 seconds.)
Pausing
1.Press button @ in bank [11] to pause dur-
ing disc playback ("PAUSE" appears on
display [30)).
2.Press button @ in bank [11] again to re-
lease pause.
* You can select a track using the track
number search during pause. ("PAUSE"
is off while a track is being searched.)
When the track search ends, the found
track is paused at its betinning.
Disc Title Input
You can enter a title for the disc in the
multi-play CD player. The title stored for the
disc can be displayed.
The ADPS function* of the multi-play CD
player lets you enter titles for up to 100
discs. (Up to 100 discs, including ITS, can
be programmed (see page 20).)
*ADPS: Automatic Disc Program Selection
A disc title can consist of up 5 characters
for a single disc.
When the number of discs exceeds 100,
discs not being played (Information not
being renewed) in memory is overwritten
by the newest.
One title is stored for each disc. The title
stored for a disc is not erased after the
disc is changed.
21