Advertisement
When Driving
Setting the Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function)
How to set the speed
1. Adjust the vehicle speed to the desired setting using the accelerator pedal.
2. Headway control begins when the SET + or SET - switch is pressed. The set
speed and the inter-vehicle distance display filled with white lines are displayed.
Travel status
Indication on
multi-information
display
Indication on active
driving display
How to set the distance-between-vehicles during headway control
The distance-between-vehicles is set to a shorter distance by pressing the
The distance-between-vehicles is set to a longer distance by pressing the
The distance-between-vehicles can be set to 4 levels; Long, medium, short, and
extremely short distance.
Distance-between-vehicles
guideline (at 80 km/h (50
mph) vehicle speed)
Indication on
multi-information display
Indication on active
*1
driving display
*1 Displays a pop-up image in the active driving display only when the driver
operates the switch.
32
For details, refer to Section 4, "i-ACTIVSENSE"
During travel at constant
speed
Long
Medium
(about 50 m
(about 40 m
(164 ft))
(131 ft))
During travel under headway
control
switch.
switch.
Short
Extremely short
(about 25 m
(about 30 m
(82 ft))
(98 ft))
Advertisement
