Table of Contents
Advertisement
Quick Links
Product host and accessories (Product Pic):
2 headphones and 1 charging case
Product structure description (Product Pic):
LED light (headphone part), touch button, microphone, charging contact point, LED light (charging case
part), charging port, button
Add a sentence to the picture:
Note: The pictures in this manual are schematic diagram, there may be deviation from the object, please
refer to the object
Basic function
Power‐on, Bluetooth pairing
Step 1 (Please confirm that your phone supports Bluetooth function):
Start‐up and pairing method:
Power on: open the charging case cover
Pairing state: after turning on, it automatically enters the pairing state. One headphone
flashes with white light and the other headphone does not flash
Step 2: Pairing mode
Select "HAVIT Merle Lite" from the mobile phone Bluetooth list to match, and the headphone
LED Light is
off
pay attention to:
A) The pairing mode lasts for 3 minutes. If you do not match during this period, the headphone will
automatically shut down. If you need to reconnect, follow the above steps to start the pairing
B) After the headphone is turned on, it will be automatically connected to the phone connected for the
last time before shutdown (Bluetooth is on). The phone does not need to search for the connection again
Shut down
Place the headphones into the charging case and close the lid
Answer the telephone
Double press the touch button on either side of the headphone
End of the call
HAVIT Merle Lite Product user guide
Advertisement
Table of Contents
Related Manuals for Havit Merle Lite
Summary of Contents for Havit Merle Lite
- Page 1 Pairing state: after turning on, it automatically enters the pairing state. One headphone flashes with white light and the other headphone does not flash Step 2: Pairing mode Select "HAVIT Merle Lite" from the mobile phone Bluetooth list to match, and the headphone LED Light is off ...
- Page 2 Double press the touch button on either side of the headphone Refuse to answer the call Long press the touch button on either side of the headphone for 2 seconds Voice assistant Press the touch button on the left headphone for 3 times (Example: Hi siri, Xiao Ai) *** When used unilateral headphone, the left and right headphones press 3 times are voice assistant *** Game mode on / off ...
- Page 3 3. Put the left earphone into the charging case, and the white light of the case flashes for 2 times 4. Put the right earphone into the charging case, and the white light of the case flashes for 2 times ...
- Page 4 FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ...
Need help?
Do you have a question about the Merle Lite and is the answer not in the manual?
Questions and answers