Table of Contents
Advertisement
1 Introduction
This manual is intended for truss owners, providers and skilled riggers and any person who has been
trained in working safely with trusses.
This manual is Part 2 of the User Manual. The User Manual consists of the following parts:
Part 1: General instructions
Part 2: Product-specific instructions
This manual must be read in conjunction with Part 1: General instructions of the User Manual.
If there are discrepancies between Part 1 and Part 2, the information given in Part 2 is the information
that applies to the product and overrides the information given in Part 1.
This manual assumes that you have been trained or work under the control of a competent or qualified
person who has been trained in safety and assembly.
1.1
About this product
PROLYTE trusses are structural elements designed to be repeatedly assembled and disassembled to carry
loads in temporary or permanent installations. Depending on the application, PROLYTE trusses can be
referred to as lifting accessories or construction products. For information on the related standards, see
Chapter 1.5.
The S36PRT series can be used for indoor and outdoor structures.
1.2
Related information
For more information on the product, see www.prolyte.com/products/aluminium-truss.
1.3
About this manual
Before working with the product, read this manual carefully and pay attention to the information
provided. Use this manual to familiarize yourself with the product, its proper use and safety regulations.
1.3.1
Safety conventions
Indicates a hazardous situation, which, if not avoided, will result in death or serious injury. This signal
word is limited to the most extreme situations.
Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation, which, if not avoided, could result in minor or moderate injury.
Indicates information considered important but not hazard-related.
Page 5 of 10
DN00171 Issue 1
© 2023 Prolyte BV.
Advertisement
Table of Contents
