Related Manuals for Prolyte S36PRT Truss
Summary of Contents for Prolyte S36PRT Truss
- Page 1 PROLYTE S36PRT Truss User manual Part 2: Product-specific instructions Original instructions DN00171 Issue 1 July 2023 © 2023 Prolyte BV.
- Page 2 If you have comments or improvement ideas for this document, please contact us by using the e-mail address found on the back cover of the document. All comments and ideas will be carefully considered in the future development of the product or this document. Page 3 of 10 DN00171 Issue 1 © 2023 Prolyte BV.
-
Page 3: Table Of Contents
Assembly and disassembly ........................10 Maintenance ............................10 Inspection ............................10 Discard criteria ............................ 10 Warranty ............................. 10 Certificates ............................10 Change history Issue Date Changes July 2023 First issue. © 2023 Prolyte BV. DN00171 Issue 1 Page 4 of 10... -
Page 4: Introduction
About this product PROLYTE trusses are structural elements designed to be repeatedly assembled and disassembled to carry loads in temporary or permanent installations. Depending on the application, PROLYTE trusses can be referred to as lifting accessories or construction products. -
Page 5: Terminology
See PROLYTE Trusses User Manual, Part 1: General instructions. 2 Safety Before working with the product, see the section Safety in PROLYTE Trusses User Manual, Part 1: General instructions. Read the Safety information carefully and pay attention to the information provided. -
Page 6: Transport, Handling And Storage
76.65 35.69 Table 2: Design values of resistances 4 Transport, handling and storage See PROLYTE Trusses User Manual, Part 1: General instructions. 5 Identification See PROLYTE Trusses User Manual, Part 1: General instructions. Page 7 of 10 DN00171 Issue 1... -
Page 7: Technical Specifications
6 Technical specifications © 2023 Prolyte BV. DN00171 Issue 1 Page 8 of 10... -
Page 8: Load Capacity
7 Load capacity In addition to the information and instructions provided in PROLYTE Trusses User Manual, Part 1: General instructions, the truss loads shall never exceed the values stated in the load tables below. As per Eurocode 9, all values provided are calculated based on a safety factor of 1.1 on the material and 1.5 on the load. -
Page 9: Coatings And Surface Treatments
This can lead to severe damage. You should never allow accessories to damage other products. 9 Coatings and surface treatments See PROLYTE Trusses User Manual, Part 1: General instructions. 10 Slinging methods See PROLYTE Trusses User Manual, Part 1: General instructions. - Page 10 Contact details: PROLYTE BV. Industriepark 9 9351PC Leek The Netherlands T +31 594 85 15 15 sales@prolyte.com www.prolyte.com Page 11 of 10 DN00171 Issue 1 © 2023 Prolyte BV.