Table of Contents
Advertisement
Recording
2,
Set the DOLBY NR switch.
—
B:To record with Dolby B.
—
OFF: To record without Dolby.
—
C:To record with Dolby C.
5.
Press the PAUSE button.
—
The FORWARD
and REVERSE indicators flash.
8.
Adjust the recording level.
—
There
is no need to adjust the recording
level during FCRS
dubbing.
@
For metal tapes:
Adjust so that the recording level indicator lights up to the "+3"
mark when the volume is high. (The indicator may light up to the
"+6" mark momentarily.)
REC OUT Button
(The mode is set to "SOURCE" when the power is turned on)
Fig. 38
a) To dub from Deck 2 to Deck 1.
b) To record a CD on Deck 1.
e) To dub from Deck 1 to Deck 2.
f) To record a CD on Deck 2.
g) To record a radio program on Deck 2.
FCRS Recording of Compact Discs
@
Before starting, play the disc and adjust the recording level. See
the previous section "Adjusting the Recording Level".
Use Deck 2. (Recording starts in the forward direction.)
FCRS CD Recording
Recording onto the tape starts automatically simply by pressing the CD
REC button (Fig. 39).
Fig. 39
a) Tape rewound automatically
b) Tape automatically set at beginning of leader tape
c) Recording starts
d) Pause
e) Beginning of playback
f) CD player operation
@
When the CD player is set to the pause mode, Deck 2 is set to the
recording standby mode.
@
When the CD player is set to the stop mode, Deck 2 is also set to
the stop mode.
@
Press the Deck 2 STOP button to cancel the recording mode. (CD
playback continues.)
Use the manual recording procedure to start recording from the
middie of the tape. See "Manual Recording".
Normai Recording
(Go to "Procedure for Normal Recording")
The tracks
are recorded
in the same
order as on the disc. (Pro-
grammed recording is also possible.)
Edited Recording
(Go to "Procedure for Automatic Edited Recording" and/or "Procedure
for Manual Edited Recording")
With this function, the tracks are selected so that no track will be cut in
half at the end of the tape.
Automatic Edited Recording
In this case, simply press the EDIT button and select the tape length
(46, 60 or 90 minutes). The tracks to be recorded are selected auto-
matically.
@
Automatic edited recording is also possible on 30-, 40-, 50- or 54-
minute tapes, etc.
Manual Edited Recording
Edited recording of programmed tracks is possibile onto 46-, 60-, and
90-minute tapes.
@
Manual edited recording of programmed tracks is also possible
on 30-, 40-, 50- or 54-minute tapes.
Auto Space Recording
This function automatically creates 5-second blank sections between
selections on the tape.
During Recording . . . (Fig. 40)
Fig. 40
a) The RECORD indicator and the FORWARD (when in the forward
direction) or REVERSE (when in the reverse direction) indicator are
lit.
b) The CD REC indicator flashes then remains lit.
Procedure for Normai Recording
For programmed
recording, set the program
beforehand. See "Pro-
grammed Playback".
1.
For auto space recording, press the AUTO SPACE button to turn
the "SPACE" indicator on.
2.
Press the CD REC button to start FCRS recording.
@
For edited recording, the auto space function is set automatically
when the EDIT button is pressed. See "Procedure for Automatic
Edited Recording".
@
To turn the auto space function off, press the AUTO SPACE button
to turn the "SPACE" indicator off.
Advertisement
Table of Contents
