DeWalt DXCM601 Instruction Manual page 29

CODE POSSIBLE CAUSE
27 Seized pump.
28 Oil level too high.
29 Poor ventilation.
Dirty cooling surfaces.
30
Too much back pressure in tank.
31
Compressor too cold.
32
E111389-C_OPERATOR MANUAL DXCM601_FPG_062118.indd 29
POSSIBLE SOLUTION
Contact a D WALT factory service center or a D
e
service center.
Reduce to proper level. See Compressor Pump Oil under
Maintenance.
Relocate compressor to an area with cool, dry, well circulated
air, at least 12 in. from nearest wall.
Clean all cooling surfaces thoroughly.
Open drain valve when starting motor.
Move compressor to a warmer location.
29
WALT authorized
e
6/29/18 9:12 AM