Introduction And Safety; Introduction; Purpose Of The Manual; Safety - Xylem Bell & Gossett 3WDS Instruction Manual

1 Introduction and Safety

1 Introduction and Safety

1.1 Introduction

1.1.1 Purpose of the manual

The purpose of this manual is to provide necessary information for:
• Installation
• Operation
• Maintenance
WARNING:
Carefully read the Instruction Manual to avoid serious personal injury and property hazards
and to ensure safe use and proper care of this product.
NOTICE:
Save this manual for future reference, and keep it readily available at the location of the unit.
The information contained in this manual is intended to assist operating personnel by
providing information on the characteristics of the purchased equipment. It does not relieve
the user of the responsibility to adhere to local codes and ordinances and the use of
accepted practices in the installation, operation and maintenance of this equipment. Further
information pertaining to the installation, operation, and maintenance of your TechnoForce e-
MTV pump controller can be found in the IOMs for the associated equipment provided
Maintenance section for a list of relevant manuals. Equipment cannot operate well without
proper care. To keep this unit at top efficiency, follow the recommended installation and
servicing procedures outlined in this manual.

1.2 Safety

WARNING:
• The operator must be aware of safety precautions to prevent physical injury.
• Operating, installing, or maintaining the unit in any way that is not covered in this manual
could cause death, serious personal injury, or damage to the equipment. This includes
any modification to the equipment or use of parts not provided by Xylem. If there is a
question regarding the intended use of the equipment, please contact a Xylem
representative before proceeding.
• Do not change the service application without the approval of an authorized Xylem
representative.
CAUTION:
You must observe the instructions contained in this manual. Failure to do so could result in
physical injury, damage, or delays.

1.3 Safety terminology and symbols

About safety messages
It is extremely important that you read, understand, and follow the safety messages and
regulations carefully before handling the product. They are published to help prevent these
hazards:
2 3DWS/4DWS Three Phase Simplex Control Panel Instruction Manual