Advertisement
Quick Links
C
H
J
F
G
HW1x6
HW2x6
HW3x22
Ø 6 x 35 mm
Ø 15 mm
Ø 8 x 30 mm
HW6x24
HW7x4
HW8x4
M 4 x 16 mm
HW11x10
HW12x4
HW13x4
Ø 5 x 15 mm
M 3.5 x 15.5 mm
HW16x3
HW17x6
HW18x14
M 6.5 x 12.5 mm
Ø 8 mm
Ø 15 mm
HW22x2
HW23x4
HW21x4
M 3.5 x 32 mm
25 x 25 mm
A
K
I
L
D
J
B
E
F
G
HW4x6
HW5x1
L 4
M 7 x 50 mm
HW9x4
HW10x10
9 x 14 x 10 mm
HW14x4
HW15x10
M 6.4 x 53 mm
HW19x1
HW20x1
HW24x4
5003
MED9601
58.6 W
"
×
15.2 D
"
WARNING :
WEIGHT CAPACITY:
62 LBS.
DO NOT STAND ON TV STAND
×
18.6 H
"
Advertisement
Related Manuals for Safavieh Furniture Esma MED9601
Summary of Contents for Safavieh Furniture Esma MED9601
- Page 1 MED9601 58.6 W " × 15.2 D " × 18.6 H " HW1x6 HW2x6 HW3x22 HW4x6 HW5x1 Ø 6 x 35 mm Ø 15 mm M 7 x 50 mm Ø 8 x 30 mm HW6x24 HW7x4 HW8x4 HW9x4 HW10x10 WARNING : M 4 x 16 mm 9 x 14 x 10 mm...
- Page 2 Part List & HW for Multi-Box Items Description Carton Call Description Carton Call Piece Piece Top Board 1 of 1 Cambolt 1 of 1 1 of 1 1 of 1 Bottom Board CamLock Side Board Left 1 of 1 Dowel 1 of 1 Side Board Right 1 of 1...
- Page 3 Attach Side Board Left (C) , Side Board Right (D), Center Boards ( H& L ) into Top Board (A) . Insert Cambolt (HW1) into Top Board (A) Insert Camlock (HW2) then tighten using screwdriver. Insert Dowel (HW3) into Center Board ( H & L ), Put Screw Cover (HW17) over the camlock.
- Page 4 ± 2 mm Do not �ghten screw yet ± 2 mm Do not �ghten screw yet Now let’s combine the bottom skirt. Start with installing Corner Brace (HW7) Combine the Bottom Skirt 2 from step 6 with Bottom skirt 1 (E), into Bottom Skirt 2 (F) using Screw M4x16 (HW6).
- Page 5 Fixing The Legs Tighten all screws on corner bracket Remove plastic cap from Legs. Insert the bolt of the Leg (G) into hole of corner brace as shown in figure. Insert Spring Washer (HW8) first into the hanger bolt of leg, then followed by Nut (HW9), Bring the assembled bottom skirt and insert into Bottom Board of the cabinet.
- Page 6 Attach Tip Protector (HW22) into back of Top Board using Screw M3.5x15.5. Hold the frame door with position of the upper pin shown in facing upward. Put the frame door by inserting it to the upper groove on Top Board (1), then place the lower part aligned into the groove on bottom board (2).