Table of Contents
Advertisement
RECORDING
~
Tape deck
{ TAPE 1 or TAPE 2 REC OUT
Cc
ic
LoIDDOBBeGouw
OC
O00
a0
ooog0
© ©©@@©
ooao
1 Turn on the receiver, tape deck and desired program
source.
2 If the MONITOR indicator lights, press this key to
disengage it.
3 Select the desired program source with the FUNCTION
key.
For an FM or AM program, tune in the desired station.
A Start the program source and set the tape deck in
recording mode.
The volume and tone settings on the receiver do not have
any effect on the recording.
"AUDIO TAPE DUBBING
To dub a tape, connect a tape deck for playback to the TAPE
1 IN jacks and a tape deck for recording to the TAPE 2 REC
OUT jacks.
a0
goo o0 087
7
)
© ©©©
aooo
=
ee
3.9
1 Turn on the receiver and connected tape decks.
2 Insert a recorded tape into tape deck 1.
3 Insert a blank tape into tape deck 2 and adjust the
recording level.
4 Press the TAPE 1 (TAPE 1 > 2) key.
5 start playback on tape deck 1 and recording on tape deck
2. Dubbing will begin.
Monitoring of a 3-head tape deck
If you have connected a tape deck having separate record
and playback heads to the TAPE 2 TAPE IN jacks, you can
monitor the recording results while recording or dubbing.
Press the MONITOR key. The MONITOR indicator will light
and the recorded program will be heard.
Press the MONITOR key again to listen to the source sound.
ko
Advertisement
Table of Contents
