Sony STR-AV780 Operating Instructions Manual page 11

P y e Se
STATION SCAN TUNING
Once all receivable stations in your area are located by
station searching, you can select the desired station quickly
while scanning the stations located.
1 Press the FM ANT-A (CATV), FM ANT-B or AM key. The "0"
indication will blink.
2 Input any frequency within the band using the number
keys.
3 Press the STATION SCAN key.
Press the "+" side for higher frequencies or the "—" side
for lower frequencies.
Each time you press "+" or "—", a higher or lower
frequency station will be tuned in.
If you keep the key depressed, the receivable stations will
consecutively be tuned in for several seconds. Release the
key when the desired station is received.
To erase the memory of a located station
Tune in the station and press the MEMORY ERASE key. The
memory of the station will be erased and the station will be
skipped over when the STATION SCAN key is pressed later.
-MEMORY PRESETTING —
Once the frequencies of the stations you want to tune in are
memorized, all you have to do is to press a number key.
A total of 10 stations can be memorized, one to each number
key, in any desired sequence.
Oo ooo 0000
©@©O© oooo
1 Tune in the desired station following the procedure
described in "DIRECT ACCESS TUNING" or "STATION
SCAN TUNING".
For an FM station, make sure that the IF band and FM
mode settings are appropriate. If necessary, change the
settings manually by pressing the FM IF BAND key and
FM MODE key. These settings will be also memorized.
2 Press the MEMORY PRESET key. The [i] (memory)
indicator will appear for a few seconds.
Memory indicator
3 While the indicator is displayed, press the desired number
key. The number of the pressed key will appear.
The frequency is now memorized.
Key number
Repeat these steps for each number key.
Notes
¢ If the memory indicator has gone off, the station cannot
be memorized. Press the MEMORY PRESET key again
and proceed to step 3.
¢ lf you preset another station to a key on which you have
already preset a station, the first station will be erased.
You cannot erase a station without presetting another
station.
11