Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sanipex BAGNODESIGN BDB-DRE-830-WH
Summary of Contents for Sanipex BAGNODESIGN BDB-DRE-830-WH
- Page 1 BDB-DRE-830-WH DREAM S CORNER INSET BATHTUB 1350X1350X520 MM www.sanipexgroup.com...
- Page 3 IMPORTANT PLEASE READ All products manufactured and supplied by BAGNODESIGN are fit for purpose as long as they are Installed, used correctly, cleaned and receive regular maintenance in accordance with these instructions ... Remove all packaging and check the product for damage or missing parts before commencing with the installation.
- Page 4 Laguna Corner Bath Installation Instructions Before you start • Before fixing remove ALL protective covering and examine carefully. The polythene film must be removed in full and the bath checked for any visible damage. Unpack and check the product is complete and undamaged. •...
- Page 5 Parts Provided 16mm Self Tapping M12 x 120mm 500mm Screws x40 Allthreads x 6 Channels x2 Panel Clips x8 Wall Fixing Brackets x4 M12 x 65mm Plastic Foot x6 M10 x 250mm Centre Foot x2 400mm Jack Leg x2 M10 Nuts x 2 C Channel Metal Foot Bracket x2 M12 Nuts x 18...
- Page 6 Please Note: • Baths should be set at supplied panel height. • The baseboard is encapsulated into the bath. • Half the panel clips supplied should be secured (if possible) to the floor • Before the final fixing of the bath, fit tap and waste fittings using a suitable sealing compound.
- Page 7 Note:...
- Page 8 www.sanipexgroup.com INB-DRE-830-WH-11-23...
Need help?
Do you have a question about the BAGNODESIGN BDB-DRE-830-WH and is the answer not in the manual?
Questions and answers