Dream s corner inset bathtub 1350x1350x520 mm (8 pages)
Summary of Contents for Sanipex BAGNO DESIGN BDB-SOK-860-WS
Page 1
BDB-SOK-860-WS SOAK FREESTANDING BATHTUB 1600X720X580MM WITH OVERFLOW www.sanipexgroup.com...
Page 3
IMPORTANT PLEASE READ All products manufactured and supplied by BAGNODESIGN are fit for purpose as long as they are Installed, used correctly, cleaned and receive regular maintenance in accordance with these instructions ... Remove all packaging and check the product for damage or missing parts before commencing with the installation.
Ta b l e o f C o n t e n t s We recommend that you carefully read this guide to ensure your bathroomware’s proper installation and reliability for many years to come. Installation Before Installation Installation Requirements Installation Notes Feet Installation Plumbing Installation...
Installation • Installation Requirements Please read the instructions carefully and follow the specified guidelines so as to avoid any damage to the fixture. 1. The owner/user of the product must keep this information for future reference. 2. Consult local building codes to make sure the installation complies with standards.
• Feet Installation To o ls 1. Turn bath upside down on a clean carpet or blanket. 2. Place feet on points A as indicated on Figure.2 The front and back sets are not the same. 3. Place the feet on the bottom of the bath and seal with silicone adhesive.
• Freestanding Bathtub Installation T o ols 1. Ensure that the drain pipe in the floor is thoroughly cleaned before the bath is placed into position and that the waste hole is positioned correctly. 2. Before the bath is fixed to the floor ensure that the bath waste and the drainage pipe line up.