Electrolux EEA27205L User Manual page 15

Table of Contents

Advertisement

2. Press and hold
activated.
3. Fill the salt container if it is empty.
4. Fill the rinse aid dispenser if it is empty.
5. Load the baskets.
6. Add the detergent.
7. Select and start a programme.
8. Close the water tap when the programme
is complete.
9.1 Using the detergent
A
B
1. Press the release button (B) to open the
lid (C).
2. Put the detergent, in powder or tablets, in
the compartment (A).
3. If the programme has a prewash phase,
put a small quantity of detergent on the
inner part of the appliance door.
4. Close the lid. Make sure that the release
button locks into position.
For information about the detergent
dosage, refer to the manufacturer's
instructions on the packaging of the
product. Usually, 20 - 25 ml of gel
detergent is adequate for washing a load
with normal soil.
Do not fill the compartment (A) with more
than 30 ml of gel detergent.
9.2 How to select and start a
programme using MY TIME
selection bar
1. Press the button dedicated to the
programme you want to select.
until the appliance is
C
The light related to the button is on.
2. Activate ExtraPower if desired.
3. Close the appliance door to start the
programme.
9.3 How to select and start the
programme
Pre-rinse
1. To select
Pre-rinse, press and hold
for 3 seconds.
The light related to the button flashes.
2. Close the appliance door to start the
programme.
9.4 How to activate ExtraPower
1. Select a programme using MY TIME
selection bar.
2. Press
.
The light related to the button is on.
ExtraPower is not a permanent option
and must be activated every time before
you start a programme.
It is not possible to activate or deactivate
ExtraPower while a programme is
running.
Activating ExtraPower increases the
water and energy consumption as well as
the programme duration.
9.5 How to start the AUTO Sense
program
1. Press
.
The light related to the button is on.
2. Close the appliance door to start the
program.
The appliance senses the type of load and
adjusts a suitable wash cycle and its duration.
9.6 How to delay the start of a
programme
You can delay the start of the selected
programme by 3 hours.
ENGLISH
15

Advertisement

Table of Contents
loading

Table of Contents