Toshiba Portege M400 Series User Manual page 72

72
Getting Started
Turning off the computer
4 Select Standby for the options you want.
❖
❖
5 Click Apply.
6 Click OK.
NOTE
Once the computer is configured, you can place it into
Standby mode by either pressing the power switch or closing
the display panel, depending on the Standby options set.
Starting again from Standby mode
To start up the computer from Standby mode, press the power
switch until the on/off light glows green. The computer
returns to the screen(s) you were using.
If you place the computer in Standby mode by closing the
display panel, you can start it again by opening the display
panel.
When I press the power button
Set this option to Standby if you want the computer
to go into Standby mode when you press the power
switch.
When I close the lid
Set this option to Standby if you want the computer
to go into Standby mode when you close the display
panel.
For more information about the Power Saver utility, see
"Toshiba Power Saver" on page 174.