Executing Sleep Mode - Toshiba Portege A600-S2201 User Manual

■
When the AC adaptor is connected, the computer will go into Sleep
Mode according to the settings in the Power Options (to access it,
Start
Options).
■
To restore the operation of the computer from Sleep Mode, press and
hold the power button or any key on the keyboard for a short amount of
time. Please note that keyboard keys can only be used if the Wake-up
on Keyboard option is enabled within the HW Setup utility.
■
If the computer enters Sleep Mode while a network application is
active, the application might not be restored when the computer is next
turned on and the system returns from Sleep Mode.
■
To prevent the computer from automatically entering Sleep Mode,
disable Sleep Mode within the Power Options (to access it, Start
Control Panel
■
To use the Hybrid Sleep function, configure it in the Power Options.
Benefits of Sleep Mode
The Sleep Mode feature provides the following benefits:
■
Restores the previous working environment more rapidly than does the
Hibernation Mode feature.
■
Saves power by shutting down the system when the computer receives
no input or hardware access for the time period set by the System
Sleep Mode feature.
■
Allows the use of the panel power off feature.

Executing Sleep Mode

You can also enable Sleep Mode by pressing Fn + F3 - please refer to
Chapter 5,
You can enter Sleep Mode in one of four ways:
■
Click Start then click the power button (
management buttons (
Please note that this feature must be enabled within the Power Options
(to access it, click Start
Maintenance
■
Click Start then click the arrow button (
menu.
■
Close the display panel. Please note that this feature must be enabled
within the Power Options (to access it, click Start
System and Maintenance
■
Press the power button. Please note that this feature must be enabled
within the Power Options (to access it, click Start
System and Maintenance
When you turn the power back on, you can continue where you left when
you shut down the computer.
User's Manual
Control Panel System and Maintenance
System and Maintenance
The Keyboard, for further details.
Control Panel
Power Options).
Power Options).
) located in the power
).
System and
) and select
Power Options).
Power Options).
Getting Started
Power
Sleep
from the
Control Panel
Control Panel
1-9