Panasonic SC-PM07 Operating Instructions Manual page 17

o
■/•DEMO
b
; :
: t_
CJ
x;■
jfl
*
!
h t
n
Tt
1 ci r~
;
; y
v
lj
At t
3
/_
OPEN/CLOSE A
id IE Hddd
,>r ij..
Recording CDs
Normal recording
• Tracks are recorded in the order in which they are found
on the CD.
• Tracks are cut in the middle when the end of the tape is
reached.
• You can record from any point on the tape.
1 Insert the cassette with the exposed tape
facing left.
2
Press [■/-DEMO] to select the CD mode.
3
Press [OPEN/CLOSE ±] to open the CD tray.
Insert the CD with label facing upward.
Press [OPEN/CLOSE ±] to close the CD tray.
4
Press [•REC/II] to start recording.
The recording will start from the first track.
To stop recording
Press P/-DEMO].
The recording and the CD will stop.
To stop recording temporarily
Press [•REC/II],
To resume recording, press [•REC/II].
To record from a specific point on a tape
Before recording, advance the tape to the point from where
you want to start recording.
To record programmed tracks
© After step 3, program the track(s) you want (>4 steps 2-4
on page 14).
© Press [•REC/II] to start recording.
17
RQT6096