V-TAC VT-1148 Instruction Manual

Solar led wall light with sensor

Advertisement

TECHNICAL DATA
MODEL
SKU
LUMENS
SOLAR PANEL
BATTERY
CHARGING TIME
WORKING TIME
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the product. The products
are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only.
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
INSTRUCTION MANUAL
SOLAR LED WALL LIGHT
WITH SENSOR
VT-1148
23017
100 Lm
DC 5.5V, 0.8W
Polycrystalline
2000mAh, Li-Ion,
DC: 3.7V
8-10 Hours
6-8 Hours
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to
access the manual in multiple languages.
BULB WATTS
COLOR
TEMPERATURE
SENSOR TYPE
SENSOR DEGREE
DIMENSION
MATERIAL
2.5 W
3000K
PIR Sensor
90-110°
91x181x66mm
Aluminium+Glass

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VT-1148 and is the answer not in the manual?

Questions and answers

Summary of Contents for V-TAC VT-1148

  • Page 1 Aluminium+Glass INTRODUCTION & WARRANTY Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product.
  • Page 2 WARNING 1. Please make sure to turn off the power This marking indicates that this before starting the installation. product should not be disposed of 2. Installation should be done by certified with other household wastes. electrician. INSTALLATION DIAGRAM High Light Low Light High Light Standby Light...
  • Page 3 INSTALLATION INSTRUCTION 1. Drill two holes on the wall and insert two plastic expansion bolts in it. 2. Fix the plastic plate on the plastic expansion piece with self-tapping screws. 3. Fix the lamp body on the plate and tighten the screws. 4.

Table of Contents