Operating The Boiler; Turning The Boiler On Or Off; Adjusting The Temperature - Navien NHB-110 User's Information Manual

3. Operating the Boiler

3.1 Turning the Boiler On or Off

To turn the boiler on or off, press the Power button for 0.3 seconds.
When the power is on, the boiler supply water temperature will
appear with the water pressure on the front panel display in
5 second intervals.
When displaying the boiler supply water temperature,
Note
the supply or return water icon turns on, depending on
the space heating control mode.

3.2 Adjusting the Temperature

3.2.1 Adjusting the Space Heating Temperature
To adjust the heating temperature:
1. Press the Mode button once. The space heating mode icon
turns on.
8 Operating the Boiler
2. Press the + (Up) or – (Down) buttons until the desired
temperature appears on the display.
You can adjust the temperature while the display is flashing. Once
the display stops flashing, the temperature setting is stored.
The Outdoor Reset Control will take precedence over
Note
this temperature setting.
In case of outdoor reset sensor malfunction, the
boiler will operate at this set temperature.
Take note of the original heating temperature in case
you want to restore it to the default.
The default space heating supply water temperature
range is 104°F (40°C, Absolute MIN) to 180°F (82°C,
Absolute MAX).
The default space heating return water temperature
range is 86°F (30°C, Absolute MIN) to 149°F (65°C,
Absolute MAX).
You can adjust the temperature range in the
parameter settings menu.
The boiler will retain your settings during a power
outage.