Advertisement
nect a tape deck having a DIN
jack to REC/PB socket, and re-
cording and playback can be ac-
complished
with a single cord.
In this case do not use MON-
ITOR
jack or
REC.OUT
jack.
LEVEL
ADMUST
TUNER
Fare np
oxte)
AUK,
o Ground Terminal
(EARTH)
@ Level adjust (LEVEL ADJUST)
This matches the volume of AUX
and TUNER with that of record
playback. While recorded
sound
is being reproduced turn the func-
tion
switch
to
AUX
and
TUNER positions without turning
the volume knob and adjust the
volume of sound.
me.
@
Tuner
and
auxiliary
input
terminals
Input sensitivity
is higher than
50 mV for both tuner and auxil-
iary input.
Input
impedance
is
higher than 100 kQ. Frequency
characteristic is flat. Adjust the
input level
by the level adjust
knobs on this rear panel.
Gc
@ PHONO 1.
Input sensitivity is 1.5 mV. Con-
nect
a record
player
having a
cartridge with an output of 1 - 3
mV (cut level of 5 cm/s.)
@ PHONO 2.
Input sensitivity is 5 mV. Con-
nect
a record
player having a
cartridge with an output of 3 - 10
mV (cut level of 5 cm/s.)
Inptt impedance is 50 kOfor both
PHONO | and 2, and the equalizer
is of RIAA standard. |
@ Microphone jacks
Sensitivity
is 1.5 mV.
and
the
characteristic
is flat.
A micro-
phone
with less than
10 kQ
impedance
can
be used. While
the microphone jack on the front
panel is in use this microphone
jack cannot be used.
Advertisement
