Intentional Misuse; Connection Procedure - ABB FPTC-01 Application Manual

Thermistor protection with the profisafe safety functions module fsps-21 for acs880 drives

Hide thumbs Also See for FPTC-01:

Table of Contents

3.1. Intentional misuse

Use the ABB products according to the instructions in the applicable documentation. ABB is not

responsible for any damage caused by the misuse of its products. The products do not protect a

machine against intentional misuse or sabotage.

—

Do not attempt to connect the modules to the drive in any way other than the method

shown in this document. If you do, injury or death, or damage to the equipment can occur.

Refer to the applicable user's manuals for information on how to install the safety modules.

To connect the FPTC-01/02 and FSPS-21 modules to the ACS880 drive, strictly obey the wiring diagram

in Figure 1.

Figure 1. Wiring diagram to connect FPTC-01/02 and FSPS-21 modules to the ACS880 drive

The FSPS-21 module is delivered with an STO cable (Figure 2):

• Four color-coded wires (red, black, yellow and white)

• Protective sleeve

• Yellow drive-side STO connector plug

• Black FSPS-21 STO connector plug

PAGE

4/10

WARNING

CO N NECT IO N PRO C ED UR E

Table of Contents

Fptc-02