Panasonic EH-NA0J Operating Instructions Manual page 10

BLACK
Mode control
To change the mode, press the mode switching button.
Mode
Hot/Cold Alternating
Hot Air
Hair Tip Care
► Intelligent sensing
Two sensors monitor environment conditions and your
way of using the dryer, and automatically control the
temperature to prevent extreme heat.
(The air and room temperature are constantly monitored.)
Mode explanation
Air temperature varies in each mode. Select your
desired temperature mode.
Hot Air mode [HOT]
Air temperature is automatically controlled based on the
actual room temperature. You can comfortably dry your
hair even in the summer heat with automatically
reduced air heat.
Hot/Cold Alternating mode [ ] < Airflow is [Fast] or
[Medium] >
Automatically alternate between hot and cold air. The
hot air lengthens unruly hair, while the cold air keeps
your hair style in place. Smoothened hair surface
reflects light, and give you a sleek, shiny finish.
10
PANASONIC : SEHNA0J60503_OL_PROOF2_NUK_2/6/2023
EH-NA0J_HK.indb 10
PANASONIC : SEHNA0J60503_ORIGINAL_PROOF1_NUK_2/6/2023
Cold Air Scalp Care Skin Care
SIZE : 148x105 mm.
Hair Tip Care mode [ ] < Airflow is [Gentle] >
Automatically alternate between hot and cold air with
the most effective cycle and airflow for the hair ends
finishing based on the ambient temperature constantly
detected by the sensors. The gentle airflow does not
tend to separate hair ends, so you can easily blow and
style your hair ends.
Cold Air mode [COLD]
Finishing with cold air helps keep your hair style in
place longer.
Scalp Care mode [SCALP]
Water remaining on your skin (scalp) may lead to
uncomfortable feeling such as stickiness. Dry your hair
comfortably with the airflow of the temperature around
60 °C, which is kind to your skin (scalp).
Skin Care mode [SKIN]
The airflow enriched with nanoe™ MOISTURE+ and
minerals helps prevent dehydration and leaves your
skin moisturized after cleansing.
• About 1 minute of face blowing will help keep your
skin moisturized.
• When selecting [SKIN] at the [Fast] or [Medium]
setting, the airflow will change to [Gentle].
To return to previous airflow, press the airflow
switching button.
• When pressing the airflow switching button during the
Skin Care mode, the airflow lamp will blink twice,
while the airflow won't change.
ACROBAT OK
2023/06/01 16:06:49