Advertisement
PROG.
1-9
1-49
OSD
ON
OFF
PROG
|
HP
PROG 1-9 1-49
Limit the programme selection.
Press the OK button.
The setting is now stored in the television.
Bar graph display on/off
With the menu line "OSD. ON OFF' you can choose between:
Procedure:
With the button A
P or +
P select the line of the menu
"OSD ON OFF".
Press the OK button.
Press the < aa > button.
This selects OSD OFF.
Press the < sal » Dutton to select OSD ON.
Press the OK button.
The setting is now stored.
"PROG. HP
Changing the volume of a channel position
lf you receive a programme whose volume differs from other
channels (too loud or too soft), this volume can be adjusted
as follows:
Procedure:
If you do not use this function until much later, you must call
up the menu first and then select the menu item "SPECIAL
FUNCTIONS".
With button ~
P.or AP highlight the fourth menu line.
Press the OK button twice.
The bar graph display "volume" appears.
Adjust the volume with the < a > button.
Only the volume of the programme currently being viewed is
changed!
The volume level is stored and stays the same if the channel
is selected again for viewing.
The function "HP" is used for autornatic programming of your
television. Only a dealer with the IR DATA-PROGRAMMERS
can use this function to programme your television automati-
cally.
36
Advertisement
